DESCRIPTION                                                          
A rapid set, high strength, ultra low viscosity concrete repair material.  This two part system is designed for quickly rebuilding broken control joints, repairing cracks and re-surfacing spalled concrete. 

Heavy Loads In Minutes!!!
…...back in service 15 minutes after the installation is made

 LOWER TEPERATURES INCREASE CURE TIME

Product Uses
a Rebuilding control joints, floor repair, "knitting cracked concrete"
a Shallow or deep spalls on ware-house floors & bridge decks
a Spalls and crack repairs in fork lift traffic areas
a Grade matching and tilt-up construction patching
a Fill and repair spalls before coating
   

Fast Set - Low Viscosity
a When used with sand in the crack, set time is approximately 10 to 15 minutes 
a Viscosity is like water....producing excellent penetration into cracks and select sand fillers
a Low viscosity produces "wet-out" penetration
a Produces high strength bonds capable of heavy traffic support in a short time
 
Advantages
a Rapid applications and set times
a Cold applications {0 O F}
a "Drive-over" in 10 to 15 minutes
a Produces high strength quickly
a Self-leveling grouts easily made
a Restores traffic use in 15 minutes
a long lasting repairs that out perform epoxy products